JED 103 CORONA DISCHARGE OZONATOR KIT
***Due to a large increase in orders at JED Engineering, shipping
lead times are currently about 3-4 days. We will update as the lead times go
back to normal, but until then, please plan on a few days before your item
ships. Thank you for understanding!
Compare to the Delzone MCD-50, more ozone for much less. 
The JED 103 manufactures ozone using the European method of an internal corona discharge chip. CD chip generation is preferred because it is believed to produce a consistent amount of ozone while the ultraviolet type units may lose effectiveness as the bulb gets weaker over time.
It is rated at 20,000 hours of use, which is about 10 years of normal usage and can ozonate spas or pools up to 2500 gallons. This is a very high quality unit for residential or commercial use.
The unit ships with back-flow valve, air tube, installation instructions, mounting screws and power cord. JED CD ozone units come with a one year limited warranty.
SPECS:
-Dimension: 5"L x 2.25"H x 5"W
-Ozone output 100MG/Hour
-120v or 240v - please specify
- For spas or pools up to 2500 gallons
PLUG TYPES:
please specify
.jpg)
OZONE INJECTION OPTIONS:
Ozone Venturi Injector Universal 1/2" barb or 3/4" barb (add to order above)
Ozone saddle clamp 2" pipe size, drill 3/8" diameter hole in pipe (add to order above)
Ozone inline bypass kit 2" or 1 1/2" (add to order above)
Note:
If you are adding this to a spa that is not ozone ready, you’ll also need to buy either an ozone saddle clamp or an ozone inline bypass kit.
For spas that have a small circulation pump installed with 3/4 inch or 1/2 inch tube, you can install an ozone venturi injector.
Ozonators are for outdoor use only.
