JED 003 Corona Discharge Ozonator Kit
***Due to a large increase in orders at JED Engineering, shipping lead times are currently at 1 week. We will update as the lead times go back to normal, but until then, please plan on a week before your item ships. Thank you for understanding!
Compare to delozone, prozone and others. JED units produce more ozone for much less. 
The JED 003 manufactures ozone using the European method of an internal corona discharge chip. CD chip generation is preferred because it is believed to produce a consistent amount of ozone while the ultraviolet type units may lose effectiveness as the bulb gets weaker over time.
The JED 003 is rated at 20,000 hours of use, which is about 10 years of normal usage and can ozonate spas up to 500 gallons. This is a very high quality unit.
The unit ships with back-flow valve, air tube, installation instructions and power cord. JED CD ozone units come with a one year limited warranty.
SPECS:
-Dimension: 5"L x 2.25"H x 5"W
-Ozone output 50MG/Hour
-120v or 240v - please specify
- For spas or pools up to 500 gallons
PLUG TYPES:
please specify
.jpg)
Note:
If you are adding this to a spa that is not ozone ready, you’ll also need to buy either an ozone saddle clamp or an ozone inline bypass kit.
OZONE INJECTION OPTIONS:
Ozone Venturi Injector Universal 1/2" barb or 3/4" barb (add to order above)
Ozone saddle clamp 2" pipe size, drill 3/8" diameter hole in pipe (add to order above)
Ozone inline bypass kit 2" or 1 1/2" (add to order above)
Note:
If you are adding this to a spa that is not ozone
ready, you’ll also need to buy either an ozone saddle clamp or an ozone
inline bypass kit.
For spas that have a small circulation pump installed with 3/4 inch or 1/2 inch tube, you can install an ozone venturi injector.
Ozonators are for outdoor use only.
For spas that have a small circulation pump installed with 3/4 inch or 1/2 inch tube, you can install an ozone venturi injector.
Ozonators are for outdoor use only.
